Optimization of Transducer Location for Novel Non-Intrusive Methodologies of Diagnosis in Diesel Engines

The health monitoring has been studied to ensure integrity of design of engine structure by detection, quantification, and prediction of damages. Early detection of faults may allow the downtime of maintenance to be rescheduled, thus preventing sudden shutdown of machines. In cylinder pressure developed, vibrations and noise emissions data provide a rich source of information about condition of engines. Monitoring of vibrations and noise emissions are novel non-intrusive methodologies for which positioning of various transducers are important issue. The presented work shows applicability of these diagnosis methodologies adopted in case of diesel engines. The effects of changing various fuel injection parameters was analyzed. Scope of using non-intrusive technique has been analyzed by changing locations of microphone. Novelty of this worklies in exploring signal processing methods for various locations around the engine test set up. Various frequency ranges of contributing noise and vibration sources were identified. Time-Frequency analysis showed the onset of various cyclic. Based on the identification of various frequency bands, it is possible to device suitable filters in order to extract more information.     

Metamorphic InAs(Sb)/InGaAs/InAlAs nanoheterostructures grown on GaAs for efficient mid-IR emitters

High-efficiency semiconductor lasers and light-emitting diodes operating in the 3–5?μm mid-infrared (mid-IR) spectral range are currently of great demand for a wide variety of applications, in particular, gas sensing, noninvasive medical tests, IR spectroscopy etc. III-V compounds with a lattice constant of about 6.1?Å are traditionally used for this spectral range. The attractive idea to fabricate such emitters on GaAs substrates by using In(Ga,Al)As compounds is restricted by either the minimum operating wavelength of ～8?μm in case of pseudomorphic AlGaAs-based quantum cascade lasers or requires utilization of thick metamorphic In_xAl_1-xAs buffer layers (MBLs) playing a key role in reducing the density of threading dislocations (TDs) in an active region, which otherwise result in a strong decay of the quantum efficiency of such mid-IR emitters. In this review we present the results of careful investigations of employing the convex-graded In_xAl_1-xAs MBLs for fabrication by molecular beam epitaxy on GaAs (001) substrates of In(Ga,Al)As heterostructures with a combined type-II/type-I InSb/InAs/InGaAs quantum well (QW) for efficient mid-IR emitters (3–3.6?μm). The issues of strain relaxation, elastic stress balance, efficiency of radiative and non-radiative recombination at T?=?10–300?K are discussed in relation to molecular beam epitaxy (MBE) growth conditions and designs of the structures. A wide complex of techniques including in-situ reflection high-energy electron diffraction, atomic force microscopy (AFM), scanning and transmission electron microscopies, X-ray diffractometry, reciprocal space mapping, selective area electron diffraction, as well as photoluminescence (PL) and Fourier-transformed infrared spectroscopy was used to study in detail structural and optical properties of the metamorphic QW structures. Optimization of the growth conditions (the substrate temperature, the As₄/III ratio) and elastic strain profiles governed by variation of an inverse step in the In content profile between the MBL and the InAlAs virtual substrate results in decrease in the TD density (down to 3?×?10⁷ cm^?2), increase of the thickness of the low-TD-density near-surface MBL region to 250–300?nm, the extremely low surface roughness with the RMS value of 1.6–2.4?nm, measured by AFM, as well as rather high 3.5?μm-PL intensity at temperatures up to 300?K in such structures. The obtained results indicate that the metamorphic InSb/In(Ga,Al)As QW heterostructures of proper design, grown under the optimum MBE conditions, are very promising for fabricating the efficient mid-IR emitters on a GaAs platform.     

一阶最优性条件研究

本对由Botsko的关于多变量函数取极值的一阶导数检验条件定理^[1]进行了分析研究，给出了更实用而简捷的差别条件。最后，举出若干例子予以说明。     

C^n中子空间之间极端主角的一些应用

本文给出了Ｃ＾ｎ中子空间之间最大和最小主角在矩阵逼近，投影算子的扰动分析，群逆以及Ｏｒａｘｉｎ逆的扰动估计，条件数理论，Ｂｏｔｔ－Ｄｕｆｆｉｎ系统扰动分析中一些应用。     

一类小缺陷码的链条件

利用射影几何方法在小缺陷码中,NMDS码是链条件码;给出k维NμMDS(0μk-2)码满足链条件的一个充要条件与一些易判断的充分条件.     

稀掺杂GaNxAs1－x(x≤0.03)薄膜的调制光谱研究

利用室温下压电调制反射光(PzR)谱技术系统测量了N掺杂浓度为0.0%—3%的分子束外延生长GaN_xAs_1-x薄膜，并对图谱中所观察的光学跃迁进行了指认.在GaN_0.005As_0.995和GaN_0.01As_0.99薄膜的PzR谱中观察到此前只在椭圆偏振谱中才看到的N掺杂相关能态E₁+Δ₁+Δ_N.当N掺杂浓度达到 关键词： 压电调制反射光谱(PzR) xAs_1-x薄膜')" href="#">GaN_xAs_1-x薄膜 分子束外延(MBE)     

关于左手性介质几何光学的研究（一）

根据几何光学中的费马原理和完善成像原理研究了光线经过正负折射率界面时的传播特性，推导了单负折射率完善成像的曲面方程，讨论了单块负折射率透镜成像特性的一些缺陷及改进方案，依此指出了最短时间原理的适用范围的局限性和利用左手性介质制作光学器件的优越性，为进一步研究左手性介质的光学特性和相关光学器件设计提供了理论基础.     

非完整系统Chetaev动力学和vakonomic动力学的等价条件

就一般非完整约束系统，从约束方程满足的变分恒等式出发，利用增广位形流形上的向量场定义三类非自由变分，即非完整变分：vakonomic变分、Hlder变分、Suslov变分，并讨论它们之间的关系以及它们成为自由变分的充要条件.利用非完整变分以及相应的积分变分原理建立两类动力学方程：vakonomic方程和Routh方程或Chaplygin方程.通过vakonomic方程分别与Routh方程和Chaplygin方程比较，得到它们具有共同解的两类充分必要条件.这些条件并不是约束的可积性条件. 关键词： 非完整约束 非完整变分 Chetaev条件 vakonomic动力学     

图有分数因子的度条件

本文研究了图有分数因子的度条件,得到了下面的结果：令k(?)1是一个整数,G是一个连通的n阶图,n(?)4k-3且最小度δ(G)(?)k,若对于每一对不相邻的顶点u,v∈V(G)都有max{d_G(u),d_G(v)}(?)n/2,则G有分数k-因子．并指出该结果在一定意义上是最好可能的。     

Inequalities for the Moments and Distribution of the Ladder Height of a Random Walk

We obtain upper bounds for the tail distribution of the first nonnegative sum of a random walk and for the moments of the overshoot over an arbitrary nonnegative level if the expectation of jumps is positive and close to zero. In addition, we find an estimate for the expectation of the first ladder epoch.